Did you know that as of 2016, there are about 1.6 billion air conditioner units in the world, but it’s expected to balloon by 244% by 2050? The demand is great for the industry, as it pushes out better technology to meet the demands of consumers while keeping it in line with the environmental goals of the world.
With that said, the newer models are almost always better than the old ones. Is it time to replace your AC system with a more efficient model or is it still good for repairs? That would depend on what repairs you need to do.
If you need to replace AC compressor, do some calculations first if you’re better off buying a new unit instead. The average cost to replace AC unit may be more expensive than repairs, but it will save you more money in the long run if you encounter the following problems.
1. It’s Past Its Lifespan
An air conditioner’s lifespan is around 10 to 15 years, so if you’ve had it for that long, it may be time to replace it. Even if you’re not seeing major issues on your AC unit, it may still be doing more harm than good.
Units at that age will have broken down too often, forcing you to turn it in for repairs. At 15 years and beyond, you’re in for more repairs. As such, these repairs could cost you more than a brand new unit.
Furthermore, it won’t be as efficient as the newer models in the market today. Instead of spending money on repairs, you could use it to buy a new one instead that’s more efficient and more advanced.
2. Your Energy Bills are Rising
Your electric bills may be a good indicator if one of your appliances need to go. Check your past bills and see if they’re increasing even though the utility company hasn’t raised their rates. If it is, your air conditioner might be the culprit.
If so, you might need to replace it, especially if it’s old – even if it’s not breaking down on you yet. As mentioned above, old units are not as efficient as the new models. Hence, they consume more energy than the new ones.
3. It’s Not the Right Size Anymore
If you’re noticing that your AC is no longer cooling up the room like it used to, it may be time to replace it. Normal wear and tear and loss of efficiency are the usual reasons why it may not be in its best anymore. However, the increasing temperature in the whole world is also a factor.
If your house is old, you may not have the proper insulation to keep up with the temperatures today. In this case, you should buy an air conditioning unit with a bigger capacity to provide the same cooling effect as your old one years ago, when the outside temperatures are lower.
Make sure to get a contractor in Hacienda Heights who does the right calculations to see which size is right for your home. Some will only replace it with the same unit, assuming your needs haven’t changed.
4. It’s Not Cooling Your Home Enough
If you have a somewhat new unit, however, that should be able to keep up with the temperatures today, the problem may be in the unit itself. It could be due to a broken compressor, damaged vents, and other issues.
Have a professional look at it to pinpoint the exact problem. In most cases, though, you’ll have to repair or replace a part. In such cases, calculate how much it would cost you to go through the repairs. If it has major problems, the cost to replace AC unit might be lower than the cost of repairs.
The contractor would know if it’s more cost-effective for you to replace the whole unit instead.
5. It Still Uses R22 Refrigerant
If your AC is still using R22 refrigerant, you’ll need a replacement for it soon. The government is phasing it out in favor of systems that are healthier for the environment. Freon is detrimental to the ozone layer, and so it will become illegal by 2020.
What it means for homeowners is that by that time, they can no longer turn in their air conditioning unit for repair when the issue is the Freon. When it breaks down and repairing it is no longer legal, they’ll have to purchase a new system altogether.
If you can, however, you may replace your unit now if it’s not beneficial to the environment. You may also have it converted to use a better refrigerant. However, it might cost you less to replace it instead.
6. It’s Producing Unusual Sounds
Are you hearing some mechanical sounds from within every time you turn the AC on? There might be loose parts in there that need only a little fixing, but it could also be a sign of major damage. Grinding, banging, and rattling sounds are signs of a serious issue; you may have to turn it off in the meantime and have a contractor look at it first.
If the issue is a broken motor bearing, the unit will need expensive repairs. There’s also the possibility that the duct system isn’t the right size for your home. In these cases, your contractor will recommend a replacement unit instead.
7. There are Moisture and Leakage
An air conditioner leaks some water while running, and condensation around it is quite normal. If the leaking is a little excessive, though, it might be a sign that there’s a serious problem.
Sometimes, the drain and the pipes are clogging that causes water to spill into the house instead. The reason could also be as simple as a dirty air filter, which can cause the coils to freeze over. When the ice melts, the water in the evaporation pan will overflow.
Still, call a professional to check if it needs some repairs or if the leakage damaged some parts. This might also lead to a replacement AC unit.
When to Replace AC Compressor and When to Buy a New Unit
If you’re thinking about replacing your AC compressor, think twice what would save you more money in the long run. Contact us today and let us help you out in determining which is the right move for your home.
Given that utilities cost the average homeowner a few thousand dollars a year, it’s vital to take your HVAC costs seriously. If you’re in the midst of a new HVAC installation, you need something that’s affordable and efficient to ensure you don’t overpay in the future. Choosing the right Hacienda Heights HVAC service installation company is a challenge but you need to ask the right questions.
Here are five questions to ask when you’re looking for someone to work with.
1. Do They Offer Emergency Services?
When you’re looking to work with any HVAC installation company, you’re going to be thinking about how great your new system is. It’s easy to be a Pollyanna when you’re getting a new system installed and you don’t expect any problems. However, if you don’t plan for the worse or how an emergency could leave you high and dry, you’d be doing yourself a disservice.
You need to know that the installation company is going to be offering 24/7 emergency services. Even if your HVAC system falls apart on a holiday, you need to ensure that you’re protected. Emergency services need to be provided by even the best HVAC installation company.
Just because they’ve installed an HVAC system that’s state of the art doesn’t mean it’s going to last forever. Problems arise with even the best systems on the planet and when that happens, they should be around the help yo with it. Since they’re the ones who installed it, they know how to fix problems better than anyone else in an ideal world.
2. Are They Certified?
If you’re looking for an HVAC company to handle your needs, you should find one that’s certified and registered with the state. Every technician who comes to install your new system should be certified so that you know that they’re prepared to handle your system. If you get your HVAC installed by someone who isn’t certified, you don’t have any easy way of knowing whether or not they know what they’re doing.
Ask your HVAC installation company about any certification they can provide. If they’re unwilling to show off certifications or try to skirt the question, they might not be the company you want to work with. They should be certified to both install and to repair the kind of system that you’re having put in.
It takes years of experience for mot HVAC specialists to become certified and experienced with any kind of system. These systems are updated and changed constantly, especially with the amount of smart home technology that’s been introduced in recent years. If you’re installing a new system, it’s going to have a lot of features that require an understanding of the future of smart home tech.
Make sure your technician knows how all of those features work and is ready to answer any questions you have.
3. Check The Reviews
In the absence of the old yellow pages that we used to use to find service providers, we’re now pushed to search engines. Thankfully we can find out more than ever about products and services with the help of online reviews. As consumers, we’ve never been more empowered than we are today.
When you’re looking up any kind of company or service provider in your area, by default, search engines are going to offer you some reviews. With the help of online reviews, you get to see what kinds of products and services that companies offer as well as how good they provide them. With detailed reviews, you’ll be able to look for things that pertain to you and the kind of HVAC system you’re about to install.
Read through for terms that look relevant to you and have to do with the kinds of products and services that pertain to you. If you’re looking for a specialized installation or a have a special kind of building you’re installing your new system in, look for details. You should be able to find more information to help you make a smarter decision about the kind of system you’re looking for.
4. Do They Specialize In What You’re Getting?
Every homeowner has their own particularities when they’re seeking a new HVAC system. Every home also sets up its own limits when it comes to the kinds of systems that are easy to install in it. If you have some clue as to what you’re looking to have installed in your home, then you should look to make sure they ‘re good at installing that kind of system.
Ask for details about how they’ve installed systems like that in the past. Find out what they can do differently than other HVAC companies in your region. They should be open and responsive.
If you find your HVAC company difficult to communicate with or that they’re a little squirrely on details, look to someone else. A reputable company is going to do everything in their power to be straightforward and open.
5. Are The Prices Competitive?
At the end of the day, you’re going to be looking for competitive prices. You need a company that provides you with value without having to haggle forever.
You should have a warranty that comes with the new system you’re installing. The price for repair and for service shouldn’t be out of this world. If you’re looking for a system installation that’s within your reach and your budget, ask for a breakdown of the price in advance.
HVAC Installation Shouldn’t Be Overpriced
With the number of competitive companies working in Hacienda Heights, it shouldn’t be hard to find an HVAC installation company to work with. Finding someone who knows what they’re doing is a matter of knowing what you need and then asking the right questions.
While Hacienda Heights, California has a reputation for warm weather, the fact of the matter is that, during the winter months, it can get fairly cold. In fact, during the months of December, January, and February, temperatures can drop to the low 40s. For this reason, most Hacienda Heights residents choose to invest in furnaces.
Are you thinking about installing a furnace in your home? Trying to find a high-quality installer? If so, read on! We’re going to explain how to find the best furnace installation company in Hacienda Heights.
Create a Pool of Candidates
The first step in finding a furnace installer is to create a pool of suitable candidates. You can find suitable candidates in a number of ways. However, the two best options are to look online and to ask friends or family.
When looking online, simply get onto a search engine like Google, and type something to the effect of “furnace installation near me”. If you’re searching from Hacienda Heights, companies which work in Hacienda Heights will appear. Look at star ratings for these various companies, then make a list with the companies that have a rating of 4 or more.
When asking friends or family, simply inquire as to whether they’ve used a furnace installer in the past. If they have, and if they were happy with the service, add said installer to your pool.
By doing these two things, you should be able to create a pool with at least 10 suitable candidates. This is more than enough candidates to choose from.
Now that you’ve gathered your pool of candidates, you need to start studying them. Start your studying by finding out how long they’ve been in business. Generally, companies with more experience are more competent than companies with less experience.
In most cases, you’ll be able to find a specific company’s establishment date by looking at its website. This is usually found on the “about” page, and usually reads something like “Established in 2005”.
We recommend choosing a company with at least 5 years of experience. Any furnace company which has stayed in business for 5 years has proven its ability to get work done right.
Inquire About Insurance
Next, you’re going to want to find out whether or not your prospective companies have insurance. If they don’t, we recommend dropping them from your pool.
Insurance can be hugely important in the event that your installer causes undue destruction to your property. It can also be important in the event that one of your installer’s employees gets injured on your property. If one of these two things happens, and your installer is not insured, you might be forced to foot the bill.
When it comes to insurance, there are two types that you furnace installation service should have. One of these is general liability insurance. The other is workers compensation insurance.
While furnace installers can have other types of insurance plans, those plans are not important to you. The ones discussed above are important because they ensure that you don’t end up being financially responsible for any mishaps which occur on or to your property.
Look for Certification
Not only do you need to make sure that your furnace installer has insurance, but that it has certification as well. In the state of California, all HVAC contractors are required to be certified with the Department of Consumer Affairs Contractors State License Board.
It’s simple: if one of the installers in your pool of candidates is not licensed, you need to drop it. Under no circumstances should you utilize the services of an unlicensed HVAC company.
Wondering how to tell whether or not a company is licensed with the state? All you have to do is use this license lookup tool!
Get a Feel for Reputation
Next, you need to do everything in your power to get a feel for your prospective companies’ reputations. There are a number of ways to achieve this, but perhaps the easiest way is by reading online customer reviews.
Sites such as Google, Yelp, and Facebook are loaded with reviews of businesses from past customers. By reading these reviews, you should be able to form a pretty good idea as to what each company can do for you.
If the vast majority of a company’s reviews are positive, it will probably provide you with good service. It the majority of its reviews are negative, you shouldn’t even think about utilizing its services.
Ask About Warranties
After you’ve narrowed your options down to only companies with positive reputations, you need to start taking a good, hard look at what they have to provide. While all of these companies can properly install your furnace for you, some of them provide warranties which set them apart from the others.
Our advice is to call up the remaining companies on your list and ask about any warranties or guarantees that they might provide. Most companies will provide warranties and guarantees of some kind. There’s no good reason to choose one which doesn’t.
Obtain an Estimate
Lastly, you need to ask for an estimate of the work that is to be done. While furnace installation cost is usually around the same price regardless of who installs your furnace, you can never be too careful. Make sure to call up each of the companies remaining on your list in order to get an idea as to what they charge.
You shouldn’t have any trouble obtaining an estimate from each of the companies that you call. If a company won’t furnish you with an estimate, you shouldn’t even consider using its services. Failure to obtain an estimate could result in surprisingly large bills hitting you months down the line.
Utilize Our Furnace Installation Services
If you’re looking for a high-quality furnace installation company in Hacienda Heights, look no further than Comfort Time Heating and Cooling. Family owned and operated since 2008, ours is the premier HVAC company in Los Angeles County.
Regardless of your heating needs, our team of skilled and dedicated technicians can help you.
Now you mention it, things are getting cold inside too.
No problem though. Your furnace has you covered, right?
After all, gas furnaces have a pretty long life span compared to other appliances. Indeed, a well-maintained furnace will heat your home for as long as 15-20 years, on average.
But they don’t last forever. Like most things in your house, your gas furnace will need to be replaced at some point in time. The real question is when you should do it.
Wait too long and you risk being without heat in the coldest California months of the year. Replace too soon though and risk spending thousands of unnecessary dollars. How do you decide when a furnace replacement is required?
Thankfully, there are certain tell-tale signs that it’s time for a change. Keep reading to learn exactly what they are and figure out if you should consider replacing your furnace.
8 Tell-Tale Signs You Need a Furnace Replacement
A fully functioning furnace is essential in the colder Californian months. But it can be hard to know when it’s time to replace a faulty one.
Here are 8 signs to look out for that can indicate the need for a furnace replacement.
1. Things are Getting Chilly
This one might sound obvious.
However, an unusually cold home can be a sign that your furnace has a problem.
Hopefully, the chill’s just to do with a faulty thermostat or air leak somewhere in the mechanism. Those are relatively common (and less serious) issues. However, the cold could also indicate something more serious.
Call a professional to take a look. They’ll run some tests and let you know the problem. You may only need some minor furnace repair work done. Whatever the case, the pros will let you know.
2. It Has Lived a Long Life
We know that furnaces can last between 15 to 20 years.
That’s a good life!
Any furnace over 15 years old is likely in its final phase of life. It may well be time for it to retire! Not sure how old your furnace is?
Try to look out the owner’s manual for a clue. Likewise, check the furnace itself. There’s often the model number on there that you can find online.
3. Your Bills Have Hit the Roof
Rising energy bills can be a clear sign that it’s time for a change of furnace.
These large appliances are generally some of the biggest consumers of energy in your house anyway. The costs can rack up in the colder months especially. Keep track of your bills to see if you’re paying more than usual.
If your bills have increased but the rates are the same, then you may have a problem. Again, you may only need some minor repair work done. However, the issue may be more serious.
Those rising running costs may be reason enough to buy a new unit anyway. It’s typical for older furnaces to cost more. Paying for a new one may pay for itself over time, as your bills come down.
4. It Requires Frequent Repairs
Your furnace will need repairs every so often.
That’s totally normal.
Indeed, it’s a good idea to get a professional to assess it every few years and to fix anything that needs doing. Be wary if it’s requiring ever more repair work done though. A well-functioning unit shouldn’t need servicing very frequently.
It is probably in your interest to replace the unit instead.
5. Inconsistent Room Temperatures
How is the temperature in the different parts of your home?
You’re looking for consistency: one room should be the same as the next. Your furnace may be broken (or breaking) if some rooms are warm when others are cold.
6. It is Making Funny Noises
A furnace that doesn’t sound right is another indication there’s a problem.
Unusual rattling, humming, and whirring that wasn’t there previously should be treated seriously. There may be damaged parts and structural issues that can cause further damage if left untreated.
The issue can escalate. Again, older units can be particularly susceptible to this and a replacement may be necessary.
7. There are Visible Signs of Wear
Strange sounds are one thing. Strange appearances are another.
Regularly look for rust, cracks, missing pieces and other signs of wear. Any such development to your furnace could indicate that it is time for a change!
Looks can be deceiving though. After all, we all show signs of aging! There may be nothing wrong with the furnace, even though it looks in a sorry state. That said, it’s better to be safe than sorry. Always get a professional in to take a look when you’re unsure.
8. It isn’t Functioning as Normal
Any shift in the usual functioning of your furnace can indicate a problem with it.
Most of the time we go about our lives in blissful ignorance of the job the furnace is doing. It’s a set it and forget it kind of set up. And that’s how it should be!
A malfunctioning furnace is likely to get your attention. Notice a change to how things usually work? There may be an issue that’s worth looking into.
Time to Wrap Up
There you have it: 8 signs it is time for a furnace replacement in your home.
It’s essential that your furnace is working properly. That’s especially true in the colder months of the year. Thankfully, they shouldn’t need replacing very frequently. However, they will do eventually.
Hopefully, you now have a better idea when the time is right for that to happen.
Remember, keep an eye out for an unusually cold house, a furnace over 15 years old, and sky-high energy bills. Likewise, be wary of frequent repair work, inconsistent room temperatures, funny noises, signs of wear, and changes to usual functioning.
These are all signs that you might need to replace your furnace.
In Downey and need a furnace replacement or service? We can help. Be sure to contact us today for more information and support.
When it comes to the installation, or for that matter, even the service and repair of heating and air conditioning equipment in Whittier California, then it is very important to understand that on no account should the task be handled by anyone without the proper licenses and certifications. This is because the installation of such important heavy-duty appliances requires highly specialized skills that are possessed only by those people who actually have the relevant training and experience. Here, the skill set required for such an operation ranges from electrical experience to masonry and even plumbing. Add to that the fact that one has to have the relevant equipment to get the job done. This is why it is all the more important that you should not try to attempt the job on your own lest you end up doing more harm than good.
Whittier Air Conditioning Installation
When installing a split HVAC unit, there are many things that have to be taken into consideration with regard to Whittier air conditioning installation in sunny California. Broadly defined, in any split AC (indeed as the very term implies), there is an internal unit and an external unit, along with all the relevant ducts and pipes that effectively connect them to each other. All of them have their own installation procedures that must be followed to the letter in order to ensure that the appliance continues to function properly throughout its service life. Let us take a quick look at how Whittier air conditioning installation is conducted by the experts at Comfort Time Heating and Cooling.
Installing the Internal Unit
We here at Comfort Time take the job of Whittier air conditioning installation seriously and will seek out the best possible place when it comes to the installation of the indoor unit. We will ask for your opinion, but it is always better to let the specialists take care of these issues. There is a certain checklist that can help you decide the right place for such an installation.
Always try and avoid any direct sunlight or any other heat source when placing the indoor unit. This way, the cold air being discharged by the AC will not be affected by the sunlight or another source of heat
As a general rule, always try and avoid any locations where there might be a chance of a gas leak
Always make sure that your brand-new AC’s indoor unit has at least half a foot of clearance in the immediate vicinity
It is imperative, that the unit is firmly mounted with iron brackets held by strong and sturdy bolts that have been bored into the wall where the unit is being installed. A metal frame can be added for additional support for the unit so as to eliminate any chance of the unit falling onto the floor
The unit should be placed at least 7 feet (or more), above the floor of the room in which it is being installed. However, this is but an average setting only, and the professionals you will hire for the task of Whittier air conditioning installation will be able to guide you better with regard to the overall height of the unit.
The unit has to be suitably well-placed above the doors and windows so that ambient sunlight does not interfere with the airflow of the unit, or in any way, decrease the efficacy of the air conditioner cooling capacity.
Ductwork and Piping Issues
Once the indoor unit has been secured, it is time to connect it with the external unit. A large hole has to be bored into the wall next to the indoor unit so that the wires and pipes connecting the outdoor and indoor units seamlessly together. In many climate control equipped rooms, various ducts pass the cold air to vents that subsequently dispense it into the different rooms. Once the pathways have been determined, they are affixed to the walls and the holes have to be cemented properly. This has to be done in order to ensure that no external air or water is able to leak into your home. Apart from that, all wiring and liquid drainage pipes have to be checked and double checked in order to ensure that water does not seep out and damage the finishing of the walls. Finally, the wiring has to be installed in such a manner that it is perfectly safe for the home. Always remember that any exposed wires can easily lead to fatal consequences, especially if the water carrying pipe is in close proximity to the main power line.
Installation the External Unit
The outdoor unit of your split AC should always have the area around it cleared of any obstructions to allow for peak performance
The external unit also requires a raised pad, which will be its base, so that it remains rock steady when the unit is working at full speed
The unit should have at least half a foot of clearance all around it so that it does not overheat, even when the external temperature is very high. If it is installed too close to the surrounding walls or floor, the hot air that it is being discharged into the atmosphere will not be able to dissipate, and it will heat up the unit beyond its capacity.
Finally, all the connections between both the units should be routinely inspected by a certified Comfort Time technician in Whittier air conditioning installation to ensure that there is no leakage.
Whittier HVAC Installation
The HVAC (heating, ventilation, and air conditioning) unit is the heavier and bulkier counterpart of the more common central air conditioning and heating system. The HVAC system can easily create a climate control environment for an entire building. Installing an HVAC system is no easy task, however, and if you do not get it right, then not only can it lead to massive power bills, but it can also result in leakage issues as well, which can be harmful. This is why investing in a Whittier HVAC installation should only be conducted by highly skilled professionals who do this sort of installation on a daily basis.
Installation of the Ducting System
The HVAC system typically has large ducts and vents that carry the cold or hot air it has generated throughout your office or home. It cools or heats the various rooms in the building when desired. If your ductwork was improperly installed in a previous Whittier HVAC installation, then the system will start losing hot or cold air. This means that the whole system will have to work harder in order to achieve the desired temperatures. This is the part where the professionals at Comfort Time Heating and Cooling who are highly skilled in Whittier HVAC Installation come into the picture. Not only will we make sure that the ducts are safe from leakage and there are no pressure points around the bends that can give out with the passage of time, but we will also make sure that system does not stop working whenever the system is used to heat or cool a climate-controlled environment. The trained and experienced team at Comfort Time will make sure your ductwork and insulation is designed properly for your HVAC installation in Whittier. We will seal all the ducts, vents, and registers to ensure that your home will have no air leaks and allow your system to run at peak efficiency. This is all covered by our 100% Satisfaction Guarantee.
Getting the Refrigerant Just Right
All HVAC units need the right amount of refrigerant in order to ensure peak performance of the unit. Should there be an insufficient quantity of the refrigerant, the system will become inefficient and will not be able to do its job properly, thus leading to increased wear and tear and higher energy bills. Conversely, should the system be overcharged, a phenomenon known as ‘refrigerant slugging’ can potentially occur. This problem occurs when liquid will enter the compressor and cause severe or even irreparable damage to the compressor. The Comfort Time team in Whittier HVAC Installations and repairs will ensure that the refrigerant is neither over pressured nor undercharged.
Whittier Furnace Installation
The first step in a Whittier furnace installation is to go about preparing the unit for its initial installation. Here at Comfort Time will make all the preparations for a Whittier furnace installation including any required permits, licenses, and equipment. We will determine the best place for a furnace return air duct taking into account any space restrictions. We will also place rubber isolation pads beneath the unit while performing a Whittier furnace installation so as to minimize the noise created by the furnace during operation. Comfort Time specializes in Whittier furnace installation and we will place a secondary drain pan directly under the unit. This is a precautionary measure in case the primary drainage system becomes blocked. This will help prevent seepage and any damage to the structure where the Whittier furnace installation is taking place. The next step in Whittier furnace installation will be to connect the gas and power supply to the furnace unit. It is absolutely imperative that there should be at least one gas shutoff valve that should be installed outside the furnace as a failsafe device. Finally, the furnace should be coupled to the main power line of the house so that it can become fully functional.
In light of the above, we can easily see that the installation of an air conditioning and/or heating system should only be handled by train professionals. We take pride in our work and have the experience to guide you to make the right decision when it comes to installing a heating and cooling system in Whittier. This way not only will your appliance work well throughout its service life, but you will also have total peace of mind with regard to all of your heating and air conditioning related problems.
All good things in life come with an expiration date. This holds for both air conditioning and heating units. Regardless of how many times you may get them repaired, the change of technology, worn out parts and malfunctioning components will make the replacement of your climate control system an inevitable reality. However, the critical thing to figure out is, when to replace your HVAC system and who to hire to do it?
The Total Life of the System
A general rule of thumb is that if your air conditioner is over ten years old, it is probably emitting harmful CFC gas (Chlorofluorocarbons). Apart from that, unlike its newer more modern counterparts, it does not have energy efficient components. In such a scenario, any repairs will almost certainly not be worth the overall expense of regular maintenances, especially if your appliance is prone to frequent breakdowns. Here, endless maintenance will just be throwing money down the drain. Unless, of course, it is a small and easily curable problem, such as debris that is clogging the condenser unit or a worn fan belt that can be replaced within a few minutes. When deciding to replace or repair an AC, many people tend to forget the critical importance of the ducting system. If the ducts are clogged or there are ruptures in the seals, then your cold air will start leaking. This is not AC’s fault at all. On the contrary, buying a new AC will not be able to solve the issue since the Pico Rivera air conditioner replacement will not be able to provide you the kind of relief that you expect and desire from your brand-new AC unit. You can ask Comfort Time Heating and Cooling in Pico Rivera about an air conditioner replacement to take a look at the condition of your existing equipment, as well as the ducts that are responsible for delivering cold air to the room. Another point to take into consideration will include the quality of the insulation in your office or house. If you were to improve your home’s ducting and padding, there is a high chance that you might not even need to opt for an air conditioning replacement in Pico Rivera. Conversely, if you were to go ahead and replace your old air conditioning system without taking care of these issues, then you might have to face the same problems all over again. There are various points that you should take into consideration before deciding on getting an air conditioning replacement in Pico Rivera:
Assess the Overall Efficiency of Your Current Cooling System
Older units were not equipped with inverter control technology. This meant that the compressors, as well as various other components, required a lot of energy, both at startup and during operation. However, today’s current crop of highly energy-efficient AC units is more energy efficient than before. It would not be wrong to state that even if your current AC unit is only a decade old, it could still require twice the amount of electricity compared to its more modern and energy-saving counterpart.
The SEER Advantage
The new age units typically operate at or below at least 10 Seasonal Energy Efficiency Ratio (SEER). This is the total amount of electric energy required to provide a specific cooling output. As of 2006, 10 SEER was the standard for many AC units. But the SEER values have increased drastically over the past few years, and these days the absolute minimum allowed by federal law is 13 SEER. California goes even further with the Minimum SEER being 14 in California. In layman’s terms, this means approximately 30 percent less electrical energy consumption. And by extension, that means a thirty percent decrease in cooling bills when compared to equipment that had been installed just a few years ago. If you live in a 1,800 square foot home, then a new 14 SEER unit will easily set you back by around $3,000 to $4,000, saving you potentially more with the hot temperatures here in Southern California. But it is possible to effectively double your total energy savings by moving beyond 14 SEER units— up to 16 SEER. Yes, these super-efficient AC units are not cheap since they can cost you as much as $5,000 to $6,000 more from the manufacturers. But that is only the short-term cost of getting air conditioning replacement Pico Rivera since they will also decrease your power bill by 60% over the average 10 SEER AC unit. And there is a bonus here as well. If the group has a SEER above 16, you can also qualify for federal tax relief of $300.
Thoroughly Inspect the Overall Condition of the Ductwork
It does not matter if you have upgraded to a ‘state of the art’ AC unit that you have selected for your Pico Rivera air conditioning replacement; you can still suffer from excess heat and humidity on hot days. This is partly because the mechanical components are only one part of any climate control system. Sometimes, damaged ducts can easily leak 10% to 30% of the cold air being blown into the system. This is why, before deciding to go for a Pico Rivera air conditioning replacement, it is deemed pertinent to have all the other parts of the entire system thoroughly checked by the proven experts at Comfort Time in the Pico Rivera area.
Consider the Building’s Construction Envelope
If the house is poorly insulated, it will put additional strain on your already aging air conditioner. On the other hand, if you were to resolve the house’s construction-related flaws adequately, then it might enable you to get rid of your larger system and replace it with a smaller, more energy efficient one. Not only will it lower your upfront costs, but your ongoing energy costs will also decrease quite significantly. The top-notch professionals here at Comfort Time Heating and Cooling will assess and, if required, upgrade the building’s overall envelope. For example, they might seal the cracks and gaps in the vent or duct seals, or they can ensure better insulation in the attic. If the job is done right, it can decrease your energy requirements by 30 percent for heating and air conditioning systems. And when coupled with a more energy efficient replacement unit, you will be able to lower your AC bills by up to 50 percent.
Your HVAC System Already Had Multiple Major Breakdowns
If the heat exchanger, compressor, or even the motor tends to fail with regularity, then the odds are that their repeated replacement with new components could cost several thousand dollars (not including labor fees). If your HVAC system has had way too many significant breakdowns in the past few years or if it frequently requires substantial repairs, the better and more cost-effective option would be to opt for Comfort Time Heating and Cooling performing an HVAC replacement in Pico Rivera.
Make Sure that Your New HVAC System Is Sized Just Right
If you have finally decided to go to Comfort Time for Pico Rivera HVAC replacement, you will be assured to get the correctly sized unit for your home or business. As a general rule, when considering Pico Rivera HVAC replacement, you should do well to remember that most cooling machines are measured by the ton. In other words, they are regulated by the cooling power of a ‘full one-ton block of ice melting in 24 hours’. If your heating and cooling requirements center around 400 to 600 sq. Feet or so, then a one-ton unit is good enough for cooling and heating purposes (this applies only to AC units that have a built-in heating function). Many people going for Pico Rivera HVAC replacement can opt for smaller groups. This will mean less frequent on/off cycles and higher energy bills.
Conversely, going for units that are too big would mean more frequent on/off cycles. This means that the parts will be subjected to greater wear and tear, not to mention the initial costs of Pico Rivera HVAC replacement. Another problem with an overly large unit is that it will not get a chance to dehumidify the air properly.
Any reasonable contractor should bring with him proper load calculation instruments and software. These instruments should also vector in such critically important data as the total number of windows in your house, the configuration of the attic, the thickness of insulation, and even the building’s orientation to the sun. This will not only produce highly exact tonnage and heating requirements for Pico Rivera HVAC replacement, but in the long run, it will also determine precisely how much cold or hot air each room will need. This is why it is imperative that when you decide to have your HVAC replaced, you should also ask the contractors to include this one-page data printout as well.
Pico Rivera Furnace Replacement: Is It Time for a New Furnace
You will almost certainly have to replace an old furnace if you can smell leaking gas or the system has ruptured in multiple places. Furthermore, if the pilot extinguishes itself every few hours, then simple replacement of parts is not the answer; instead, you will have to go for outright Pico Rivera furnace replacement. Yes, replacement costs can be pretty high, but then the good news is that the new furnace will almost certainly be far more efficient. Which means a substantial reduction in your heating bills, while you will be able to keep your home toasty warm and comfortable on even the coldest winter nights. Here it is pertinent to understand that Pico Rivera furnace replacement makes excellent sense if your old furnace is already beyond three-quarters of its overall life expectancy. In such a case, repairs would end up costing considerably more than replacement. Add to this the fact that older furnaces, at the end of their service life, barely work and can quickly inflate your energy bills to a great extent. You can check the manufacturing date and make a decision accordingly. The general rule of thumb is that an average furnace can last up to 15 to 20 years max. And then regardless of how well-maintained the unit may be, it will still start giving problems. This means it is time to go for Pico Rivera furnace replacement. Apart from that, another reason to consider replacing your old furnace is energy efficiency. Old heaters operate on an 80% efficiency ratio. That means that 80% of the energy is transferred to your room, while the remaining 20% goes up the chimney. However, with time, this ratio can become skewed as the layers of soot and grime as well as worn out parts decrease this ratio to unacceptable levels. When compared to the 98.5% efficiency ratio of the modern furnace today, these old furnaces are little more than energy traps and should be replaced immediately.
To opt for further repairs on your AC, HVAC, and furnace or to replace them with newer units is an entirely subjective decision. You can make your choice based on the level of monthly expenditure of your old equipment and compare it with the day to day running costs of the new more energy efficient units. Ultimately, you will see that replacement can turn out to be less costly than repairing your old units again and again.