Finding The Right Furnace Size and Type in Hacienda Heights

An illustration of a gas and furnace.

April 11, 2019

A furnace is an essential installation that keeps loved ones in your home warm and comfortable when it is chilly outside. Is yours operating at optimum?

Upgrading a furnace from 56 percent to 90 percent efficiency can cut carbon dioxide emissions by 1.5 tons annually. You can contact your local, family-owned, furnace installation contractor today and enjoy reduced costs in fuel and maintenance.

The cold winter months are tough on furnaces. They can’t keep up with freezing temperatures and may break down quickly, especially if you’ve got an older home that wasn’t built for heating technology today! In addition to this problem many homeowners find themselves dealing with leaks or cracks in their unit which could lead not only them but also other family members who live at risk of getting sick due too poor hygiene practices around these types care units where as soon as something goes wrong there’s no time left before its too late–so make sure they get looked after by professionals every now and then.

Getting Your Furnace Size Right

When you are looking at furnaces, it’s important that the right size system is chosen. Larger units cost more than smaller ones but will provide greater comfort in winter by heating large spaces like rooms or whole houses rather then just small apartments where efficiency matters less because there isn’t any one spot close enough to people who want heat whenever they need some!

Manual J Load Calculation

If you are going to get your furnace replaced there is a chance of rushing to the internet and choosing what you think is suitable for you. That approach wrong.

Your best choice to getting it done right the first time is to invite a qualified contractor to do a Manual J load calculation for your home. If a contractor gives a quote without assessing your home, be ready for anything after the installation.

An undersized or oversized system won’t heat your home accurately. It may even fail way before its expected lifespan.

Contractors do Manual J load calculations to determine the HVAC equipment that is suitable for a building. The math takes into account the square footage of your home and the efficiency of ventilation.

The contractor will measure the walls, floors, ceilings, windows, doors, partitions and so on. He will also consider the building materials and the direction that your home faces.

Apart from these measurements, there will be some other technical considerations to take into account.

The exercise can be daunting. Fortunately, there are software tools that simplify the task. The report gives the BTU or Ton rating for the system that suits your home.

Source of Fuel

You can find contractors to install electric, gas, and oil furnaces. The choice depends on your preference, price, and location. However, there are some essential things to note about each.

Electric furnaces generate heat from electrical current. Electric heating is quite expensive. If you rely on the electrical grid for your heat, the system can empty your wallet.

The fuel in gas furnaces is natural gas. It is easy on the pocket when temperatures are low. Southern California has an abundance of natural gas which makes it very typical here.

The third type of furnace uses propane or oil. The fuels are reliable, but they require a lot of storage space.

If tidiness is a concern for you, don’t install this furnace since oil can mess up your house. It can also be more costly than natural gas, though prices keep fluctuating. However, it may be the only realistic option for homes in areas without gas lines.

An economical solution for heating and cooling in homes is installing an electric heat pump. The system uses minimal energy to transfer heat from an air stream to another. When temperatures are high, it serves as an air conditioner.

Efficiency

Most modern central-heating systems use gas. The annual fuel-utilization-efficiency (AFUE) rating of a furnace determines the efficacy of the system.

The Federal Trade Commission requires that furnace and boiler manufacturers indicate the AFUE on their products. This information should be easy to find if you’re looking for a new home heating system online, but it’s also listed beneath most product specifications or descriptions when searching directly at companies’ websites

It’s vital to note that AFUE does not account for the heat wasted through the piping material or the duct system. The loss can be up to 35 percent of the system’s output depending on the quality of the ducts.

Zoning Systems

A building does not maintain the same temperature in different areas. It may be a consequence of design, location, or other factors. If you install a master thermostat at one place in your home, you will have irregular temperature patterns. Some rooms will be colder or hotter than expected, and you may end up consuming more energy than necessary.

To avoid such issues, find a contractor that can install a furnace with a zoning system. The system divides your house into sections and assigns an independent thermostat for each. Furthermore, dampers can shut or open the ducts for various zones to regulate the temperature as desired.

Costs: Buying and Installing

Pricing of furnace installations can be tricky, but it primarily depends on the features included. The more efficient varieties are more expensive than the ones with lower AFUE. The size and brand also matter.

When hiring a contractor, confirm whether the quote includes all the costs that are typical of HVAC installations, like permits and inspections.

If you are replacing an old furnace, you might not need to install new ducts. So, you will save a considerable amount. Your contractor can advise on any additional parts that you may need to buy.

Getting Your Furnace Replaced in Hacienda Heights – Bottom Line

You can find many models of furnaces from various manufacturers across the world. They come with different features that you may want to explore before making a decision.

Since a furnace is a long term investment, insist on value before price. Select a product that is reliable, energy efficient, and safe. We have explained how critical it is to involve an HVAC contractor to help with determining the right size.

Most of the information you would need is available online. You can take advantage of consultancy from the manufacturer or the dealer.

Are you looking for a furnace? Don’t get confused out there. Contact us for advice.

Written by Angel Muro

I started Comfort Time Plumbing Heating & Cooling out of a love for HVAC & Plumbing and a desire to make our customers comfortable. My curiosity about heating, plumbing, and air conditioning turned into a career focused on expertise and customer care. Through this blog, I aim to share helpful tips and stories from my experiences, aiming to assist you with your HVAC & Plumbing needs beyond just outlining our services.

April 11, 2019

Comfort Time Logo Large

About Comfort Time Plumbing Heating & Cooling

At Comfort Time Plumbing Heating and Cooling, we are your trusted HVAC & Plumbing experts serving Southern California. With years of experience in the industry, we take pride in delivering top-notch heating and cooling solutions tailored to the unique climate and needs of the region. Whether you’re in the coastal areas, inland valleys, or urban centers, our team of dedicated professionals is here to ensure your year-round comfort. We stay up-to-date with the latest technologies to offer energy-efficient solutions, and our commitment to customer satisfaction means you can rely on us for prompt and reliable service. When it comes to your HVAC needs in Southern California, Comfort Time is the name you can trust.

You May Also Like…