Simple Ways to Fix Your Home Heating System Yourself

How Your Central Heating System Works

Whether you’re looking to heat your home or cool it, a centralized heating system is likely the best option. Central HVAC systems have many benefits including improved indoor air quality due in large part because they eliminate stale and stagnant pockets of warm/cooled atmosphere throughout any given space while also helping maintain consistent temperatures throughout all areas.
The furnace at your house is a complicated machine. It doesn’t just heat up the air in one room, it distributes that warmth throughout every level of this giant space! For most central heating systems today, their source comes from natural gas which runs through pipes before ending up inside our homes as well. It’s the heart of your home’s temperature control system. When it starts up, a blower motor kicks on to suck cold air through return vents in order heating that same batch before pushing hot breezes back into every room through ducts with ceiling fans installed at each end as well!
The brain of this whole operation is a thermostat. You use it in order to set the desired temperature for your home, and often position them near vents where airflow will be evened out so they can get an accurate reading from all angles. The thermostat is the most important component in your heating and cooling system. It works closely with a circuit board that’s responsible for turning on or off all major components, including electricity to run an AC unit as well heat pumps.
[sp_wpcarousel id="52688"]

Whittier

Norwalk

Pico Rivera

La Habra

Hacienda Heights

Santa Fe Springs

Downey

Lakewood

La Mirada

Cerritos

What You Should Look For First When Repairing Your Home Heating System

You may be tempted to try a quick fix or repair on your own, but there are a few things you should know before taking on any home heating repairs.

First, remember that safety always comes first. If you’re not comfortable working with gas or electricity, it’s best to leave repairs to the professionals. Second, take the time to diagnose the problem before you start making any changes. A little troubleshooting can save you a lot of time and money in the long run.

Third, be sure to have all the right tools and materials on hand before you begin. Here are the things you should check before doing your own repairs.

Check and Clean Dirty Ductwork

At Comfort Time AC Repair and Home Heating Repairs, we understand the importance of keeping your ductwork clean. Not only will it improve the quality of your indoor air, but it can also help to prolong the lifespan of your HVAC system. Here are a few tips to help you keep your ducts clean:
  • Schedule a professional cleaning every two years. This will help to remove any buildup of dirt, dust, and pollen.
  • If you have pets, have the ducts cleaned more frequently to prevent pet hair from accumulating.
  • Between professional cleanings, you can vacuum the vents with a soft brush attachment to remove any dust that has accumulated.
  • Inspect the ductwork regularly for any signs of dirt build up and free your unit of dirt

Regularly Check Your Furnace Filter

One of the most important things you can do to keep your furnace running efficiently is to change the filter regularly. A dirty filter will restrict air flow, causing the furnace to work harder and use more energy.

In addition, a dirty filter can lead to increased dust and pollen in the air, which can aggravate allergies and respiratory problems. Changing the filter on a regular basis is one of the easiest ways to reduce your heating bills and maintain a comfortable indoor environment.

Check The Furnace’s Heat Exchanger

The heat exchanger is a vital part of the home heating system, and it is responsible for transferring heat from the furnace to the air. Over time, the heat exchanger can become cracked or damaged, which can lead to serious problems.

A cracked heat exchanger can allow carbon monoxide to escape into the home, putting your family at risk. Home heating repairs should always be done by a qualified technician, so if you think your heat exchanger may be damaged, call Comfort Time AC Repair for an inspection.

Limit Switch is Vital so Check It!

One of the most important parts of your heating unit is the limit switch. The limit switch is responsible for turning the unit off when it gets too hot. This prevents your AC unit from overworking itself and eventually breaking down.

If you notice that your AC unit is not working as well as it used to, or if it’s turning on and off more frequently, it’s likely that the limit switch needs to be replaced. Comfort Time Heating and AC repair can help you diagnosis the problem and get your AC unit back up and running.

Check Your Furnace’s Starting Mechanism

One of the most important parts of the furnace is the starting mechanism. This is what tells the furnace when it’s time to turn on and start heating your home. If this part isn’t working properly, it can result in furnace issues or even AC repair problems.

Fortunately, there are a few things you can do to keep your starting mechanism in good working order.

First, make sure that you change your furnace filter regularly. A clogged filter can prevent the starting mechanism from working properly.

Second, have your furnace serviced by a professional at Comfort Time, as our HVAC professionals can assist you and give you the service you need at a reasonable charge.

Regularly Check The Blower Bearings

The blower bearings are an essential part of your system, and they can wear down over time. If they are not properly maintained, they can cause your system to work harder and use more energy, driving up your utility bills.

Comfort Time AC Repair & Home Heating Repairs can inspect your blower bearings and make any necessary repairs or replacements. Don’t wait until it’s too cold to have your heating system serviced.

Check The Blower Belt

The blower belt is one of the most important parts of your furnace system. If the belt is loose, it can cause the blower to work harder, which can lead to premature wear and tear. If the belt is too tight, it can damage the bearings in the blower. As a result, it’s important to check the blower belt on a regular basis and to adjust it as needed.

Fortunately, this is a easy task that you can do yourself.

Comfort Time Home Heating Repairs provides step-by-step instructions on how to check and adjust the blower belt. By taking a few minutes to perform this simple maintenance task, you can help keep your Comfort Time Heating and AC system running.

Check Your Furnace’s Thermostat

Comfort Time offers AC repair, home heating repairs, and furnace maintenance. Check the furnace thermostat to ensure it is set at the proper temperature. The furnace should be set to “Auto” mode, not “On.”

Comfort Time can also perform an energy audit to help you determine how to make your home more energy-efficient and reduce your utility bills.

When You Should Call An Home Heating Repair Company

While comfort is important, it’s also important to save money when you can. With heating DIY repairs, you can be comforted in the knowledge that you saved money by completing the repairs yourself.

Not only will you have the satisfaction of a job well done, but you’ll also be able to enjoy the comfort of your home for a longer period of time. So don’t be afraid to roll up your sleeves and get to work on those heating DIY repairs. It’s well worth the effort!

But if the damage is too severe and you’ve done all the tips we gave, it’s time for you to call – Comfort Time!

At Comfort Time, we believe that comfort is a right, not a privilege. That’s why we’re committed to providing high-quality HVAC services at an affordable price. Whether you need repairs, maintenance, or installation, our team of certified professionals will get the job done right.